Operation; Control Panel; Fastfreeze Function; Switching Off - Electrolux CI1301 Manual De Instrucciones

4. OPERATION

4.1 Control panel

Power indicator light
1
Temperature regulator
2
FastFreeze light
3
4.2 Switching on
Connect the appliance to the main power
supply.
1. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up and
a sound will signal for 2 seconds.
If the temperature inside the
appliance is too high, the
Alarm light will blink and the
sound signal alarm will turn
on.
2. Push the FastFreeze switch and the
sound signal alarm will get off.
3. Push the FastFreeze switch once
again and the FastFreeze light will
light up. The appliance will start to
operate.

4.3 Switching off

Turn the Temperature regulator to the
"O" position and a sound is on only for 2
seconds .
The power indicator light will switch off.

4.4 Temperature regulation

The temperature is regulated
automatically. However, you can set a
temperature inside the appliance
yourself.
1 2 3 4 5
FastFreeze switch and alarm reset
4
switch
Alarm light
5
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.

4.5 FastFreeze function

The FastFreeze function accelerates the
freezing of fresh food and, at the same
time, protects foodstuffs already stored
from undesirable warming.
To activate this function press the
FastFreeze button.
The FastFreeze indicator appears.
This function stops automatically after 52
hours.
You can deactivate the FastFreeze
function before its automatic end by
pressing the FastFreeze button again.
The FastFreeze indicator will turn off.
ENGLISH 7