Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
CAUTION:
Clean out the upper and lower
guards to ensure there is no accumulated saw-
dust which may impede the operation of the lower
guarding system. A dirty guarding system may limit
the proper operation which could result in serious
personal injury. The most effective way to accomplish
this cleaning is with compressed air. If the dust is
being blown out of the guards, be sure the proper
eye and breathing protection is used.
CAUTION:
After each use, wipe off the saw
dust on the tool. Fine saw dust may come inside the
tool and cause malfunction or a fire.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Adjusting 0°-cut accuracy
This adjustment has been made at the factory. But if it is
off, you can adjust it as the following procedure.
1.
Slightly loosen the lever on the bevel scale plate.
2.
Make the base perpendicular to the blade using
a triangular rule or square rule by turning the adjusting
screw.
2
3
Fig.40
► 1. Triangular rule 2. Adjusting screw 3. Lever
3.
Tighten the lever and then make a test cut to
check the verticalness.
Adjusting the parallelism
This adjustment has been made at the factory. But if it is
off, you can adjust it as the following procedure.
1.
2.
Slightly loosen the screw illustrated.
2
Fig.41
► 1. Screw 2. Base
3.
the base so that the distance A and B becomes equal.
4.
the parallelism.
OPTIONAL ACCESSORIES
1
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
•
•
•
•
•
•
•
•
•
•
•
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
21 ENGLISH
Set the tool to the maximum cutting depth.
Make sure all levers and screws are tightened.
A
B
While opening the lower guard, move the rear of
Tighten the screws and make a test cut to check
These accessories or attachments
Circular saw blade
Rip fence (Guide rule)
Guide rail
Bevel guide
Clamp
Sheet
Rubber sheet
Position sheet
Dust nozzle
Hex wrench
Wireless unit
Makita genuine battery and charger
1
1
Publicidad
