Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Alarm: Exh Probe fault
The device is provided with a temperature probe which measures the temperature of air expelled from the inside.
Press the [] key to access the "ALARM' menu and the following will appear:
Call Customer service to request assistance from technical personnel.
Alarm: Sup Probe fault
A fault on the supply air temperature sensor generates this signal. After having resolved the problem (through Technical
Service intervention), you can reset the error (answer "YES" for "CALL SERVICE").
Alarm: T sup probe (T < 5°C)
A locking error message is generated if the T measured by the supply air temperature sensor falls below 5°C. The probe
fault causes the message "Alarm!" to appear on the "HOME" page. Press the [] key to access the "ALARM' menu and the
following will appear:
"SETUP' page
Select the "SETUP" menu and press the [] key on the "MAIN MENU" page.
From this new page you can manage:
• Date & Time;
• Program.
50
[ ▲ ]
9
9
9
9
[
]
[
]
]
[ ▲ ]
9
9
9
9
[
]
[
]
[ ▲ ]
9
9
9
9
[
]
[
]
Publicidad
