GE WSLP1500 Manual Del Propietario E Instalación página 15

Installation Instructions
WASHER CONNECTIONS - STATIONARY MODEL WSLS1500
A WARNING: Mo,e
sure
the washer is
unplugged.
[_] FLUSH WATER LINES
Run some water from the hot and cold faucets
to flush the water linesand remove particles that
might clog up the water valve screens.
_]CONNECT TO WATER LINES
Connect the inlet hose ends to the HOT and COLD
water faucets tightly by hand, then tighten another
turn with pliers.Turn the water on and check for
leaks. Retighten if necessary.
I-_ CAREFULLY MOVE THE WASHER
TO ITS FINAL LOCATION
F4-1CONNECT DRAIN HOSE
Form a U shape on the end of the drain hose with
the hose pointed toward the drain. Placethe hose in
a laundry tub or stand pipe and secure it with a cable
tie (not included).
NOTE:If the drain hose is placed in a stand pipe
without forming a U shape, a siphoning action could
occur. There must be an air gap around the drain
hose. A snug hose fit can also cause a siphoning
action.
Cable Tie
Cable Tie
LaundryTub
Stand Pipe
Cable Tie
[]PLUG THE POWER CORD INTO A
GROUNDED OUTLET
/
Ensure proper ground
exists before use
15