GE WSLP1500 Manual Del Propietario E Instalación página 17

Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1500-- ONE-FAUCET CONNECTIONS
Use the hose connector provided with the washer for a
one-faucet connection.
TO CONNECT THE WASHER:
T
[] REMOVE THE UNI-COUPLE ® HOSE
FROM INSIDE THE WASHER BASKET
Drain Connection
Faucet Connector
Water Filter
Uni-Coupler Hose
_]CONNECT TO VALVE INLET
Attach the COLD water supply connector to the
COLD water valve inlet (color BLUE).Make sure the
washer is inside the connector before tightening.
[-4]TIG HTEN CONNECTOR
Tighten the connector, ensuring the threads are
aligned properly for tightest fit. Inspect for kinks
or binding of the hose.
[][]CONNECT TO WATER LINE
Attach the hose connector to the faucet adapter by
pulling down on the locking collar while lifting up on
the connector until it snaps into place. Make sure
the water filter provided is in place.
Locking Collar
t
Hose Connector
[][]CONNECT DRAIN HOSE
Attach the drain hose to the rear of the washer.
Install the clump on the drain hose and tighten to
prevent leakage of water.
17