Mitel Networks MiVoice 5370 Guia De Inicio Rapido página 5

Forwarding calls
1. Press , then
M F
ENU
2. Select the type of forwarding
3. Select the destination (user
4. Enter the call number and validate.
Reset call forwarding with
> /
R D
TURES ESET ELETE
Deflecting a Call During the Ringing Phase
1. Press during the ringing phase.
D
EFLECT
2. Enter the call number and press
Transferring During a Call
1. Press the Call key or
number and wait until the called party answers.
2. Press , the call is transferred. If no-one
C
ONNECT
answers, cancel with
take back the first call.
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
1. Press
E
NQUIRY CALL
wait until the call is answered.
2. Press to switch back and forth be-
B
ROKERING
tween the callers.
Conference call
Connects several callers for a conference call. You
are making/taking a call:
1. Press
E
NQUIRY CALL
wait until the call is answered.
2. Press .
C
ONFERENCE
3. Add other callers using
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer: Press
.
C
ALLBACK
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
>
M A F
ENU CTIVATED EATURES
the function you want.
D
ELETE
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
them through the cable holders.
3. Insert the MiVoice M530/M535
module as indicated in the drawing, snap it
into place and plug in the connection cable
and power cord if required.
>
S
ORWARDING ELECT
1
.
2
/subscriber
>
M A
ENU CTIVATED
.
2
.
OK
, enter the call
E
NQUIRY CALL
2
/
E R
ND CALL ECOVER
, enter the call number and
, enter the call number and
1
.
E
NQUIRY CALL
> and
S
ELECT
2
expansion key
Notes
. • Some function commands of the vocal an-
nouncements
3
). • Always disconnect the phone from the mains
first before you connect/disconnect an
MiVoice M530/M535
F -
EA
• Always install the footstand before you plug in
the cables.
• Always remove the cables before you detach
the footstand.
Connections
3
and
or
Document designation
• Document number: eud-0988_xx / 1.3
• Valid as of: Mitel 5000 R5.1 / MiVoice Office 400
R1.0
• Copyright © 01.2015 Mitel Networks Corporation
You can download all user documents available
for this device (e.g. user guide) at
/
R
ESET
www.mitel.com.
3
are not to apply on this phone.
2
expansion key module.
Connecting to the IP network
(MiVoice 5370 IP only)
Connecting the PC
(MiVoice 5370 IP only)
Connecting the power supply
(MiVoice 5370 IP only)
Telephone connection
(MiVoice 5370 only)
Connecting the handset
Headset connection
Connection MiVoice M530/M535
expansion key module or power sup-
ply
Connection on the MiVoice M530/
M535 expansion key module
Connection power supply or
MiVoice M535 expansion key mod-
2
ule
2
2