Parker Hyperchill Plus-E Manual De Uso página 297

,
Variable modbus
MODBUS
unit adress 1
BaudRate 9600
Protocol Parity 1
Address Display label App
type
8964 Set INT
8965 dIF1 INT
8966 dIF2 INT
8969 OFFC INT
8970 ONC INT
8973 LiS INT
8974 HA1 INT
8975 LA1 INT
8976 db1 INT
8977 HA2 INT
8978 LA2 INT
8979 dI2 INT
8980 HA3 INT
8981 LA3 INT
8982 SEA INT
8983 dIA INT
8984 ArA INT
8985 DtHA INT
8986 SRQH INT
8987 drq INT
8988 SrC INT
8989 drC INT
8990 SRQL INT
8995 PStA INT
8996 ON_OFF_SUP BOOL
16385 rE USINT
16387 SUP BOOL
16384 C-F BOOL
16386 rAL USINT
16388 Ud4E BOOL
16390 ASt BOOL
16391 r0n UINT
16465 CPT BOOL
16445 Erd BOOL
8999 Dma INT
8961 dMin INT
16423 dAS USINT
16431 tH1 INT
16472 tH1L INT
16409 CHA1 BOOL
16414 CHA2 BOOL
16411 CLA1 BOOL
16419 rLa USINT
16420 tLa USINT
EVEN Not configurable
NONE
Stop Bit
ODD
Data Bit
Default Min Max Unit
13(55,4) LIS 65(149) °C/(°F)
4(7,2) 0,3(0,5) 10(18) °C/(°F)
0,3(0,5) 0,3(0,5) 10(18) °C/(°F)
2(3,6) ONC 10(18) °C/(°F)
1(1,8) 0(0) OFFC °C/(°F)
5(41) LA2 65(149) °C/(°F)
60(140) -40(-40) 65(149) °C/(°F)
-40(-40) -40(-40) 65(149) °C/(°F)
1(1,8) 1(1,8) 10(18) °C/(°F)
60(140) -40(-40) 65(149) °C/(°F)
2,5(36,5) -40(-40) 65(149) °C/(°F)
4(7,2) 1(1,8) 10(18) °C/(°F)
60(140) -40(-40) 65(149) °C/(°F)
-30(-22) -30(-22) 65(149) °C/(°F)
19(66,2) LIS 65(149) °C/(°F)
1(1,8) 1(1,8) 10(18) °C/(°F)
5(41) -30(-22) 65(149) °C/(°F)
5(9) 0(0) 30(54) °C/(°F)
30(86) -10(14) 55(131) °C/(°F)
19(34,2) 0(0) 30(54) °C/(°F)
15(59) -30(-22) 50(122) °C/(°F)
2(36) 0(0) 10(18) °C/(°F)
5(41) -10(14) 30(86) °C/(°F)
0 0 1
FALSE FALSE TRUE
0 0 2
FALSE(0) FALSE(0) TRUE(1)
FALSE(0) FALSE(0) TRUE(1)
0 0 2
FALSE(0) FALSE(0) TRUE(1)
TRUE(1) FALSE(0) TRUE(1)
6 0 300 sec
FALSE(0) FALSE(0) TRUE(1)
FALSE(0) FALSE(0) TRUE(1)
25(77) 0(32) 37(98,6) °C/(°F)
15(59) -20(-40) 37(98,6) °C/(°F)
5 0 10 Minutes
0 0 9999 KHours
0 0 9999 Hours
TRUE(1) FALSE(0) TRUE(1)
TRUE(1) FALSE(0) TRUE(1)
FALSE(0) FALSE(0) TRUE(1)
5 0 15 n°
60 5 60 Minutes
Address with offset 40000 (es: 8964+40000=48964)
Read Only
Read&write Set point
Read&write Differential 1 for thermostating
Read&write Differential 2 for thermostating
Read&write Differential for compressor OFF
Read&write Dirrerential for compressor ON
Read&write Set point lower limit
Read&write B1 High terperature alarm
Read&write B1 Low temperature alarm
Read&write B1 Low level temperature alarm retrigger
Read&write B2 High temperature alarm
Read&write B2 Low temperature alarm
Read&write B2 Alarm differential
Read&write B3High temperature alarm
Read&write B3 Low temperature alarm
Read&write Set point (B1) antifreeze
Read&write Thermostating differential (B1)
Read&write Set point activation (B3)
Read&write Differential for dipendent water exit regulation
Read&write SetH point for control panel heater
Read&write Differential control panel heater
Read&write Setpoint Carter Heater
Read&write Differential value for carter heater
Read&write SetL point for control panel resistor
Read Only Status ON/OFF dryer
Read&write Supervisor ON OFF request (to change the state machine - change True from "0" to "1")
Read&write Remote ON/OFF enable
Read&write ON/OFF enable from supervison
Read&write Unit of measure (FALSE=°C, TRUE=°F)
Read&write Alarm relè management
Read&write Enable antifreeze resistor 0=disabled
Read&write Autostart enable 0=NO 1=YES
Read&write Main power supply return
Read&write CPT control 1=Enable
Read&write Enable managing water with Ambient temperature
Read&write Max value to stop compressor in ERD
Read&write Min value to run compressor in ERD
Read&write Minimun time between two switch ON of the same compressor (minutes)
Read&write Compressor 1 working hours warning threshold (x1000)
Read&write Compressor 1 working hours warning threshold
Read&write HA1 alarm management
Read&write HA2 alarm management 0=Warning; 1=Alarm; 2=System
Read&write LA1 alarm management
Read&write Max number of Events LA2 Alarm
Read&write Interval Time LA2 Alarm
ICEP080E-ICEP120E
Note
13