Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4.10
ACTIVATE TURBO BOOST (TEMPORARILY
INCREASED CUTTING SPEED)
1.
Press the turbo button to increase the speed up
to 3200 RPM.
2.
Release the turbo button to operate at the default
cutting speed.
Note: When using the turbo boost button,
the battery will drain faster. Therefore, it is
recommended to use the turbo boost button only
when necessary.
4.11
OPERATE THE SELF-PROPELLED DRIVE
SYSTEM
4.11.1
SELF-PROPELLED DRIVING SYSTEM
1.
While holding the blade activation lever, pull
either of the drive levers towards the handlebar
to engage the self-propelled driving system.
2.
Release either set of start handle and drive lever
from the same side.
3.
Adjust the speed control with your free hand.
Note: To sustain self-propelled mowing,
continually hold the blade activation lever and
drive lever from either the left or right side at
the same time.
• To increase the speed, slide the speed control
switch towards the Rabbit Symbol.
• To decrease the speed, pull the speed control
switch towards the Turtle Symbol.
English
TURBO
TURBO
TURBO
4.
Release the drive lever to disengage the self-
propelled driving system.
4.11.2
OPERATE WITHOUT MOWING
To engage the self-propelled driving system while
the mower is not running:
• Press and hold the power button, then pull either of
the drive levers towards the handlebar.
Note: Complete the two consecutive actions within
5 seconds.
4.12
LED HEADLIGHTS
1.
The LED headlights will turn on when the device
is switched on and will switch off when the device
is switched off.
4.13
STOP THE PRODUCT
1.
Release the blade activation lever(s) to stop the
product.
2.
Open the battery door.
3.
Press the battery release button to remove the
battery.
12
TURBO
Publicidad
