How To Use The Remote Control - Num'axes CANICOM 800 Manual De Instrucciones

2. Select the collar you want to code on the remote control:
For CANICOM 800 :
Press the A or B key in order to select the collar (the letter A or B will appear on the LCD screen).
For CANICOM 1500 :
Press the 1, 2, 3 or 4 key in order to select the collar (the number 1, 2, 3 or 4 will appear on the LCD screen).
3. Activate the receiver collar: Approach the area where the On/Off switch magnet is located in the
remote control until coming in contact on red mark located on the receiver collar for 1 second.
4. Move the remote control away from the collar.
5. Press the beeper button
synchronized with your remote control.
If you have several collars, renew the same procedure for each one.
Re-coding procedure (for all the codings except the first):
Warning : If you have several collars, you have to recode them one at a time.
1. Activate the remote control: Press the On/Off red button
control for 1 second.
2. Select the collar you want to code on the remote control:
For CANICOM 800 :
Press the A or B key in order to select the collar (the letter A or B will appear on the LCD screen).
For CANICOM 1500 :
Press the 1, 2, 3 or 4 key in order to select the collar (the number 1, 2, 3 or 4 will appear on the LCD screen).
3. Receiver collar in position « deactivate » (off, indicator off): Approach the area where the On/Off
switch magnet is located in the remote control until coming in contact on red mark on the receiver
collar for 6 seconds. The indicator on the collar lights in fixed green, then flashes in red.
4. Move the remote control away from the collar.
5. Press the beeper button
synchronized with your remote control.
If you have several collars, renew the same procedure for each one.
N Reprogram a receiver collar
Receiver collar can be re-coded indefinitely, either with the same remote control, or with a new CANICOM
remote control. Ref. Re-coding procedure.

How to use the remote control

The CANICOM 800 remote control is designed to operate with 1 or 2 receiver collar(s).
The CANICOM 1500 remote control is designed to operate with 1, 2, 3 or 4 receiver collar(s).
Before sending any training instruction (beep sound or stimulations), you have to select the dog
you want to send a message to:
- dog A (black collar) or dog B (yellow collar) for CANICOM 800
Gb - 25
of the remote control. A sound beep is emitted, the collar is then
of the remote control. A sound beep is emitted, the collar is then
( (
located on the side of the remote