Num'axes CANICOM 800 Manual De Instrucciones página 26

- dog 1 (black collar), dog 2 (yellow collar), dog 3 (orange collar) or dog 4 (blue collar) for
CANICOM 1500
To select the dog you want to train on the remote control:
For CANICOM 800: Press the A or B key in order to select the collar (the letter A or B will appear on the
LCD screen).
For CANICOM 1500: Press the 1, 2, 3 or 4 key in order to select the collar (the number 1, 2, 3 or 4 will
appear on the LCD screen).
O
Button : beeper
If you press the « Beeper » button
function: the beeper will continue to sound as long as you press the button.
A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on the
collar goes from flashing green to permanent green as long as you press the button.
It's up to you to use the beep key depending on the way you want to train your dog. With the beeper you
can:
- send a sound to your dog when he is disobedient,
- draw its attention,...
It's very important to always use the beeper in the same way in order not to disturb your dog.
O "F" button: Flash stimulation
Press the « F » button to send a warning to your dog using stimulations transmitted by two contact points
located on the receiver collar for a defined length of time of less than one second.
A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on the
collar goes from flashing green to permanent red as long as you press the button.
O "C" button: Continuous stimulation
Press the « C » button to send a warning to your dog using stimulations transmitted by two contact points
located on the receiver collar, the duration will be as long as you press the button but limited to 8 seconds
maximum.
O "Booster" button
Press the Booster button to stop your dog instantaneously.
You are able to choose the level of stimulation you think to be the best for an immediate effect. As a result,
you do not need to press the "+" button.
Those stimulations are transmitted by the two contact points located on the collar for as long as you press
the button but no more than 8 seconds max.
The level of stimulations selected thanks to the "Booster" button can be different for each collar.
Gb - 26
the collar will emit sound signals. There is no time limit for this