Publicidad
Idiomas disponibles
Idiomas disponibles
HM700ADISTKIT
Steam Line Installation Examples
2 (51)
MINIMUM
12 (305)
MINIMUM
RADIUS
12 (305)
MINIMUM
BEFORE
ANY BEND
CONDENSATE
LINE
CONNECT
CONDENSATE
HOSE TO FILL
CUP
Fig. 3. Steam distributor above humidifier (hose).
Measurements in inches (mm).
12 (305)
MINIMUM
RADIUS
12 (305)
MINIMUM
BEFORE
ANY BEND
Fig. 4. Steam distributor below humidifier (hose).
Measurements in inches (mm).
For more information on maintenance and replacement, please visit http://yourhome.honeywell.com
or call 1-800-468-1502 or 1-800-814-9452.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
12 (305)
CONDENSATE
LINE
SUPPORT
BRACKETS
CONNECT
STEAM
HOSE TO
CYLINDER
SUPPORT
BRACKETS
12 (305)
MINIMUM
CONDENSATE
TRAP
TO DRAIN
12 (305)
MINIMUM
RADIUS
12 (305)
MINIMUM
BEFORE
ANY BEND
USE FULL SIZE CONDENSATE
TEE AT LOW POINT. SLOPE
LINES UP TO "T" AND
IMMEDIATELY AFTER IT.
1
HOSE WILL SOFTEN OVER TIME. PROPER SUPPORT IS NECESSARY.
M35717
Fig. 5. Steam distributor below humidifier with
obstruction (hose). Measurements in inches (mm).
M35718
Fig. 6. Common steam line installation errors.
® U.S. Registered Trademark
© 2016 Honeywell International Inc.
33-00160EFS—01
M.S. 03-16
Printed in United States
1
SUPPORT
BRACKETS
OBSTRUCTION
2 (51)
MINIMUM
TO DRAIN
CONDENSATE
TRAP NOT 12
(305) BELOW
DISTRIBUTOR
STEAM LINE
NOT SLOPED
Measurements in inches (mm).
12
(305)
12 (305)
MIN.
MINIMUM
TO DRAIN
M35719
NO
CONDENSATE
TRAP AT
VERTICAL
TRANSITION
M35720
Publicidad
