Care & Maintenance - bloom luxo sleep Guia Del Usuario

eng
Contact bloom for replacement parts.
Never substitute parts.
• WARNING: Never use plastic shipping
bags or other plastic film as mattress covers
not sold and intended for that purpose.
They can cause suffocation.
• Never use a water mattress with this
product.
• If refinishing, use a non-toxic finish specified
for children's products.
IMPORTANT!
• Before assembling this cot, read and
understand the instructions. Incorrect
assembly may make the cot unsafe.
• Do not use this cot if any part is broken, torn
or missing.
• Do not leave anything in the cot (such as toys)
that provide a foothold.
• Do not use the cot near open heat sources,
bar heaters, open fires or exposed flames.
• Keep the cot clear of trailing cables and
hanging cords.
• Keep medication, and small items that a child
could choke on away from the cot.
• DO NOT place
surface.
• When castors are used, make sure the castors
are locked when not moving the baby bed.
Care & Maintenance
• When cleaning your baby bed, use a non-toxic,
non abrasive cleaner. Mix a solution of water
with a small amount of a mild detergent. Apply
to bed surface with a damp cloth.
12
on an elevated
• When moving the baby bed without castors
assembled, always lifts the unit. Do not push or
drag it to avoid damaging the base.
• It is important that the humidity levels in the
room be controlled from extremes of too
much humidity or too little. The bed should
not be placed directly next to air-conditioning
outlets, fire places, radiators, space heaters,
humidifiers or dehumidifiers. Exposure to
extreme variations of temperature and
humidity can damage wood products.
• Keep the bed out of direct sunlight. UV rays
may fade colors and in some cases darken
them. It can cause crazing or hair line cracks in
the finish. White finishes will darken naturally
over time and exposure to direct sunlight will
hasten this natural process along with some
wood darkening; this is not considered to be a
quality defect.
• If you need to put your baby bed in storage for
any period of time do not store it in a damp
or hot environment. Allow air flow around the
furniture and do not stack anything on it.
Check List
• The baby bed is ready for use only when the
locking mechanisms are engaged. Please
check carefully that they are fully engaged
before using the baby bed.
• Always check the bed is free from damage
before use. Do not use product if any
damage is present.
• Regularly check that all assembly fittings are
always tightened properly and retighten as
necessary.