Product Information - bloom luxo sleep Guia Del Usuario

eng

Product Information

This baby bed has been designed and tested to
ensure compliance with the latest relevant safety
standards.
• patented no-tools-required rapid-assembly
• folding design for easy storage – no small
parts to lose
• simple drop-side mechanism, easy access to
baby
• 4 lockable castors included
Model No.: 10304
Patents Pending
Colour & contents may vary
NOTE: Adult assembly required.

Instructions For Safe Use – Please read
carefully and keep for future reference
The correct use and maintenance of your baby
bed will ensure it gives long and trouble-free
use. When somebody else is using your baby
bed please ensure they also know how to use
it, how to adjust it and the necessary safety
precautions. The safety of your child is your
responsibility.
1 - 2 Castors Assembly
– 4 lockable castors are included. The use of
these is optional.
– If you choose to use castors with your baby
bed, always lock the brakes of the castors
whenever the bed is in use and you must use
all 4 castors.
– (#05 castors) Attach the castors by screwing
them into the threaded holes by turning the
hex bolt until tight.
– To lock castors, push down on the locking
levers on each castor.
– To unlock, lift up the levers on each castor.
– To remove castors, turn hex bolt to unscrew
until loose.
3 -  baby Bed Set up
– (#01 crib frame) Fully extend the crib frame by
pulling end panels outward.
– (#02 base board) Place the base board
within the cot frame. Make sure correct side
up – the side with the warning labels is the
top side of base board.
– Lock the clasps on both ends of the base