PACKAGE CONTENTS
A
B
PLANNING FOR SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during
shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do
not install in shaded areas as these areas will not allow the
batteries to fully charge and reduce the nighttime operating
hours for your light. Ensure that the installation location is away
from other nighttime light sources such as street or porch lamps.
These light sources may prevent your solar light from
automatically turning on.
HOW SOLAR LIGHTS WORK
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the
rechargeable batteries. At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time
depends on geographical location, daily weather conditions, and season. For optimal performance during the evening, allow the batteries
to charge for 6 to 8 hours in direct sunlight.
Assembly and Installation
Attaching and installing the solar
1
head and bracket
□ Remove protective clear film on the surface of the solar panel.
□ Twist solar head (A) out from the lantern (B) by twisting in a
counterclockwise motion. Adjust switch to desired lighting
mode: steady white light (White), color changing (Color) or no
light (OFF).
□ Insert bracket (C) into hole on the bottom cover of the lantern
(B).
□ Insert bracket (C) to the top collar hole of the lantern (B).
□ Insert LED of solar head (A) into center hole on bracket (C).
□ Twist solar head (A) onto lantern (B).
Solar Lantern
Item #0823927 78120
Model #xxx-xxx
C
D
E
Part
Description
A
Solar head
B
12in Nylon lantern
C
D
AA Ni-Cd 400mAh battery (installed)
E
Battery cover (assembled)
Use and Care
Guide
Quantity
Bracket
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
1
1
1
1
1