Customized Settings; Mmi Operation - Maytronics WAVE 300 XL Instrucciones De Uso

mmi alerts
Filter bag: This LED will light up when
the filter bag is full and needs cleaning at
the end of the cleaning cycle. You are not
required to immediately stop the operation.
The LED indicator will automatically reset
on the next operation with a clean bag.
Alert: LED will light up as an indication of
an error that stops the robot. Generally,
inspect the robot to locate the problem and
re-operate. If the error repeats itself - details
of the specific error will be displayed on the
MMI screen. Refer to the Troubleshooting
section at the end of this manual.
Loose weave filter bags are provided as an option, to be used to collect large debris.
TIP
They should also be used in cases of sand accumulation in the pool.

8. CuSTomized SeTTinGS

The Dolphin Wave robot is controlled from the MMI console. You can customize the robot's settings
to match the specific type of swimming pool that is to be cleaned. 4 different swimming pool
configurations can be set and stored in the MMI's memory for future use.
When you configure a pool profile, you can also set the cleaning-cycle time and the delay time before
the robot starts its cleaning cycle. The procedure for configuring additional pool profiles
is explained in Configuring Additional Pool Profiles on page 9.
The MMI keyboard procedures are explained in the next section.

mmi operation

Use the control buttons
various commands.
Use the MMI functions that appear in the various screen displays to navigate between the screens
and to configure the software.
MMI Functions:
Command
Menu


 Start 
Select
Modify
Back
Exit
Wave XL User Instructions
|
located on the MMI below the screen, to activate the
Description
From the Wave screen, press Menu to display the Main Menu screen
Scroll up
Scroll down
Press both green buttons simultaneously to start pool cleaning
Press Select to confirm your selection after using the scrolling buttons
Press Modify to change settings after making a selection
Press to return to the previous screen
Press to return to the Wave screen
Filter Bag
Alert
7