Mi-T-M Corporation THE JOB PRO JP Serie Manual Del Operador página 4

4
IMPORTANT SAFETY WARNINGS
ELECTRICAL PRECAUTIONS
RISK OF ELECTRIC SHOCK OR ELECTROCUTION: WARNING
SERIOUS INJURY
PRESSURE WASHER IS NOT PROPERLY GROUNDED. YOUR
PRESSURE WASHER IS POWERED BY ELECTRICITY AND MAY
CAUSE ELECTRIC SHOCK OR ELECTROCUTION IF NOT USED
PROPERLY.
1. This product must be grounded. Make sure the pressure washer is equipped
with a GFCI built into the power supply cord. If this is not available, the
pressure washer must be plugged into a receptacle that is protected by a
GFCI. Disconnect when not in use.
2. If your unit is equipped with a GFCI, DO NOT drop the GFCI as damage
could result. If the GFCI is accidentally dropped, be certain to test the
GFCI before using to ensure it is working properly. (Follow instructions on
GFCI for test procedures.)
3. Always be certain the unit is receiving proper voltage. Disconnect when
not in use.
4. DO NOT modify the plug provided with the product. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician. DO NOT
use any type of adapter.
WARNING ELECTRICAL SHOCK MAY OCCUR FROM ELECTRICAL
CORD.
5. Check power cord for signs of crushing, cutting or heat damage. If
replacement of plug or cord is needed use only identical replacement parts
6. DO NOT use extension cords with this pressure washer.
7. Keep all connections dry and off the ground. Do not allow electrical cords
to lay in water or in such a position where water could come in contact
with them. Do not touch plug with wet hands.
8. DO NOT pull on the electrical cord to disconnect from the outlet.
WARNING ELECTRICAL SHOCK MAY OCCUR IF PRESSURE
WASHER IS NOT OPERATED PROPERLY.
9. DO NOT direct spray on or into electrical installations of any kind! This
includes electrical outlets, light bulbs, fuse boxes, transformers, the unit
itself, etc.
10. DO NOT allow metal components of the pressure washer to come in contact
with live electrical components.
11. Never operate the pressure washer with safety guards/covers removed or
damaged.
WARNING SERIOUS
UNQUALIFIED PERSONS ATTEMPT ELECTRICAL REPAIRS.
12. Any electrical wiring or repairs performed on this pressure washer should
be done by Authorized Service Personnel in accordance with National and
Local electrical codes.
13. Before opening any electrical enclosure, always shut off the pressure washer,
relieve pressure and unplug the pressure washer from the power source.
Allow the pressure washer to cool down. Never assume the pressure
washer is safe to work on just because it is not operating. It could restart
at any time! Service in a clean, dry, flat area.
OR DEATH COULD
INJURY OR DEATH
Mi-T-M JP-Electric Operator's Manual
OCCUR IF THE
MAY OCCUR IF