● AIR BOOST
It is used to regulate the master air value (low frequency compensation) of all preset outputs; it is
invalid in the BYPASS mode. You may appropriately regulate AIR BOOST as per your presettings. It is
worth noting that overdrive may occur if the regulation is large in some conditions.
● TONE BOOST
It is used to regulate the master brightness value (high frequency compensation) of all preset
outputs; it is invalid in the BYPASS mode. You may appropriately regulate TONE BOOST as per your
presettings. It is worth noting that overdrive may occur if the regulation is large in some conditions.
● Bluetooth/Bluetooth Indicator
Long press: Long press the button to turn on/off Bluetooth;
Shortly press: Shortly press the button to restore the parameter or volume of current function. (The
button is invalid is some conditions);
Bluetooth indicator: The off status indicates that it is turned off; the flickering status indicates that
it is not connected; the solid status shows that it is connected.
Bluetooth device connection instruction: Before connecting to Bluetooth, you need to make sure the
Bluetooth indicator is not turned off. Select "HUSH-I PRO" in the Bluetooth interface of your phone
system. The Bluetooth indicator will go solid after the connection is successful, and you may play
music accompaniment by using your phone.
● Save Presettings
Press the "Save" button for the first time to select the preset location and volume for storage, and
press it for the second time to confirm the storage.
HUSH-I PRO Host Software and Host Connection:
1. Visit https://www.donnermusic.com/support/downloads to download the software and
experience the whole functions and latest firmware of HUSH-I PRO.
2. Install the software into your computer as instructed; use a USB Type-C cable to connect your
computer to HUSH-I PRO. You may edit/import IR files by using the software after a successful
installation.
3. Currently, the PC control software of HUSH-I PRO is compatible with WINDOWS and MAC OS only,
while other computer systems are not supported for the time being.
Charge:
- Please use the attached special charging cable to power the product.
- When the device is charged, red light is on; when it is fully charged, green light is on.
Restore Factory Settings:
In the upper computer, you may restore all presettings to factory settings and restore IR to factory
settings as well.
8