Aiwa NSX-D7 Manual De Instrucciones página 13

SETTING NEW EQUALIZATION CURVES
MANUALLY
Up to four equalization curves can be stored as the manual
modes Ml -M4.
1
2
3
4
5
Press FREQUENCY UP or FREQUENCY DOWN
to select a frequency.
The level indicator of the selected frequency flashes.
Turn MULTI JOG to adjust the level of the selected
frequency.
Repeat steps 1 and 2 to make the desired
equalization curve.
Within 4 seconds, press ENTER.
"MEMORY" is displayed for 8 seconds.
Within 8 seconds, press one of the graphic
equalizer preset buttons Ml -M4.
The equalization curve is stored.
The equalization curve has been memorized to Ml.
I
To select a manual-preset
GEQ
1 Press PRGM/MANU to select the manual mode. One of the
MANUAL indicators is selected.
2 Press one of the graphic equalizer preset buttons Ml -M4.
To cancel the selected mode
Press the selected button again. "GEQ OFF is displayed.
The DSP (Digital Signal Processor) SURROUND adjusts the
reverb level and delay time to give a resonant surround sound
cluring playback, allowing you to enjoy the real sound presence
clf different environments. ~
This unit has been programmed with 4 different DSP
SURROUND modes.
SELECTING A PROGRAMMED DSP
$lJRROIJND MODE
VVhen you select the programmed DSP SURROUND mode, the
sound presence of a disco (DISCO), live music performance
(LIVE), stadium (STADIUM) or concert hall (HALL) can be
cbtained.
F'ress DISCO, LIVE, STADIUM or HALL.
m
DSP indicator
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source is monaural
Select LIVE or STADIUM to obtain a simulated stereo effect.
VVhen DISCO or HALL is selected, no sound will be heard from
the surround speakers.
To cancel the
selected mode
F'ress the selected button again. "DSP OFF" is displayed.
im
VVhenthe MIC or ECHO level is changed, the DSP SURROUND
mode is automatically canceled.
ENGLISH
12