Whalen Jaxon 3-in-1 XL-27 Manual Del Usuario página 11

Assembly Instructions for Table-top Console
Tools required: Allen wrench (provided), Phillips screwdriver, mallet, power drill, and 3/8" drill bit.
17. Position the assembled console at the desired location against a wall. If necessary, adjust the
pre-attached Floor Levelers at the bottom of Legs (F and G) to level the unit. Now, follow the
instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the
tip-over restraint to the Back Frame and the wall.
NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO
THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.
18. The table-top console is now ready for use. Be sure to position your Flat Panel TV in the
center of the console.
NOTE: For Tilting Wall Mount, proceed to PAGE 20.
TV
11
F/G