Whalen Jaxon 3-in-1 XL-27 Manual Del Usuario página 5

(4 used in this step)
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Locate the Back Frame (E) on a level and protective surface with the flush surfaces facing up.
As shown.
3. Align and attach the Top and Bottom Shelf Frames (A and C) to the Back Frame (E) with four
1" Bolts (3). Make sure that the wood panel will face up when the unit is turned upright.
4. Fasten the Middle Shelf Frame (B) to the Back Frame (E) with two 1-3/4" Bolts (4). As shown.
Assembly Instructions
A
B
UP
E
1" Bolt
③
C
A/C
(2 used in this step)
5
4
B
E
3
E
1-3/4" Bolt
④