Whalen Jaxon 3-in-1 XL-27 Manual Del Usuario página 17

Assembly Instructions for Floating Swivel Mount
1
J
KL/KR
2
MAKE SURE ALL BOLTS ARE TIGHT AND THE SPINE IS AT A 90 DEGREE ANGLE.
USE A QUALITY LEVEL TO VERIFY THE MOUNTING FRAME IS LEVEL PRIOR TO
INSTALLATION OF TV.
26. Once the Monitor Brackets (KL/KR) are attached onto the back of television, ask for
assistance to lift the television up to hang the Monitor Brackets (KL/KR) onto the Mounting
Frame (J). Set the hooks on the Monitor Brackets over the Mounting Frame and then lower
them onto the bars of the Mounting Frame.
NOTE: Loosen the Lock Bolt that is pre-attached to each Monitor Bracket to ensure an easy fit
at the bottom hook.
27. Center the television and tighten both Lock Bolts with a long Phillips screwdriver until they hit
the underside of the Mounting Frame (J) to secure it in place.
KL/KR
J
KL
KR
17
J