Descargar Imprimir esta página

BH FITNESS S3 G6261 Instrucciones De Montaje página 9

Unidad electrónica
Ocultar thumbs Ver también para S3 G6261:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
EMERGENCY STOP.-
For the user's maximum safety, this
unit is equipped with a safety key (g)
and a STOP button. The safety key (g)
must be slotted into its housing (E),
Fig.2, otherwise the machine will not
start.
When you are using the machine
always clip the cord on the safety key
to your clothing. Tugging on the cord
will pull the safety key out of its slot
and the machine will stop immediately.
To restart the machine simply put the
key back into the key slot.
Remove the safety key (g) whenever
the machine is not being used and
keep it out of children's reach.
Pressing the red button marked STOP
will also stop the unit immediately.
To restart it, press the button marked
START again.
PULSE
INSTRUCTIONS – USE.-
PULSE Hand-grip.
On this model the pulse rate is
measured by placing both hands on
the sensors (R), located on the
handlebar, Fig.3.
When both hands are placed on the
sensors the heart symbol on the
PULSE screen will begin to flash and
after a few seconds a heart rate
reading will be displayed.
If both hands are not placed correctly
then the pulse function will not work.
If a «P» appears on the screen or the
heart symbol does not flash, make
sure that both hands are placed
correctly on the sensors.
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown
is
purposes.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
9
MEASUREMENT
merely
for
guideline

Publicidad

loading

Este manual también es adecuado para:

G6261