Publicidad
Specifications
Emitter: 6x CREE XHP50B LED with a lifespan of up to 50,000 hour
Battery options: 3x 21700 Li-Ion batteries
Operating voltage: 3.0V - 4.2V
Dimension: 133 mm (length) × 63mm (head diameter)
Weight: 492 grams (without batteries)
Anduril 2 User Interface
flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized to
military grade specification type III, anti-abrasive finish to get solid built body, anti-crash geometry and
better heat exchange.
Toughened mineral glass lens - scratch and wear resistant
Automatic Stepdown: Turbo mode steps down to High mode automatically to prevent overheating.
Electronic reverse polarity protection from improper batteries installation
Low voltage protection: The flashlight steps down automatically when the voltage is low. It also turns off
automatically if the voltage gets lower than 2.7V. Please recharge the batteries.
Advanced Temperature Regulation (ATR) technology: As the temperature rises, Q8 Plus is programmed
to automatically step down and step up the brightness to prevent overheating.
Battery Installation
Before first use, please unscrew the head and remove the insulating film. If the batteries need to be replaced,
make sure that the positive end of the new batteries face the flashlight head when you put it in.
Battery Availability
Battery Type
Rechargeable Li-ion battery
Power Indicator
1. While standby, the green indicator is always on. You can change the indicator mode:
Off-Low-High-Blinking (10H to Advanced UI, from off, 7 clicks to change indicator standby modes).
2. While charging, the blue LED indicator blinks. When the flashlight is fully charged, the blue LED indicator
will remain on to indicate full charge.
3. While discharging (powerbank function), orange indicator remains on if the batteries have sufficient power.
When the remaining battery charge is low (requires charging), the orange indicator blinks. It will automatically
stop the powerbank function.
Operation Instruction
Quick Start
After putting three batteries in the light and tightening the parts together, the light should quickly blink once to
confirm it has power and is now operational. After that, basic usage is simple:
Click to turn the light on or another click to turn it off.
- Hold the button to change brightness.
- Release and hold again to change brightness the other way.
That is all the user needs to know for basic use, but there are many more modes and features available for
Dimension & Quantity
21700 x 3
Compatibility
Yes
Publicidad
