Maintenance; Replacing The Mains Fuse; Cleaning Recommendations - Promax GF-941 Manual De Instrucciones

USER'S MANUAL GF-941

5. MAINTENANCE

5.1 Replacing the mains fuse

The fuseholder lid is placed in the mains base (see figure 1) and it is the voltage
selector.
To substitute the fuse, disconnect the power cord.
With an appropriate screw driver remove the fuseholder lid.
Substitute the melt fuse for another of the type 5 x 20 mm, 250 V, F and
0.5 A
1 A
When inserting the fuseholder lid be careful that the voltage selector is in the correct
position according to the mains.

5.2 Cleaning recommendations

CAUTION: To clean the cover, take care the instrument is disconnected.
CAUTION: Do not use scented hydrocarbons or chlorized solvent. Such products
may attack the plastics used in the construction of the cover.
The cover should be cleaned by means of a light solution of detergent and water
applied with a soft cloth.
Dry thoroughly before using the system again.
04/2003
for 220 V, 230/240 V
for 110 V, 125 V
Page 19