Publicidad
Idiomas disponibles
Idiomas disponibles
LEVELING REFRIGERATOR
• Your refrigerator has two leveling legs that
are located in the front bottom corners of your
refrigerator. After properly placing your refrigerator
under its final position, you can level your refrigerator.
• Leveling legs can be adjusted by turning them
clockwise to raise your refrigerator or by turning them
counterclockwise to lower your refrigerator.
INSTALLATION OF TOP MOUNTING BRACKET
WARNING
To avoid risk of refrigerator tipping over, appropriate top mounting bracket must be used to secure the refrigerator.
To install a top mounting bracket on this refrigerator,
follow the below steps:
refrigerator using the four M5 x 16 mounting screws
provided.
NOTE: Top mounting bracket is not provided.
Contact distributor to identify top mounting bracket
for this product.
2. Place the refrigerator into cabinetry.
3. Secure top mounting bracket to cabinetry. Wood
bracket to solid wood cabinetry.
INSTALLATION OF FLOOR SCREWS (Optional)
possible sliding.
This refrigerator has provisions on the underside for
refrigerator to floor.
inside lower rail.
refrigerator to floor.
49-1000702 Rev. 2
Installation Instructions
TIP OVER HAZARD.
The refrigerator door will close easier when the
leveling legs are extended.
Raise
Screw Opening
Lower
13
Publicidad
