Publicidad
Idiomas disponibles
Idiomas disponibles
Symptoms
Noise or sound
distorted on FM
broadcast
Appliance does not
work.
Unable to play a CD
CD skips while
playing
Intermittent sound
from CD player
Appliance does not
react to pressed
buttons/keys
Appliance enters
STANDBY mode
after 10 minutes
(approx.)
Operation voltage:
Batteries:
Output:
FM Frequency:
Power consumption:
Wörlein GmbH
Gewerbestrasse 12
D 90556 Cadolzburg
Germany
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
TROUBLESHOOTING
Possible cause
Station not tuned properly.
Telescopic antenna is not
fully extended
Power cable is not
connected properly.
Unit not in CD function
mode.
CD is installed incorrectly.
Disc is dirty or scratched.
Dirty or defective disc. Dirty
pick up lens.
Player is subject to
excessive shock or
vibration.
Malfunction due to
electrostatic discharge.
Power saving function
enabled
TECHNICAL SPECIFICATIONS
230V, 50Hz
6 x 1.5V C size (UM-2) (Optional, not supplied)
2 x 1W RMS
87.5MHz to 108 MHz
14W
IMPORTER
Tel.:
+49 9103 71 67 0
Fax.:
+49 9103 71 67 12
Email:
service@woerlein.com
Web:
www.woerlein.com
www.woerlein.com
SCD1960 / English Instruction Manual
Solution
Fine tune the FM broadcast station. Fully
extend the FM telescopic antenna
Check if the power cable is properly
connected to the AC socket at the back of
the appliance and to an electrical outlet.
Select CD function mode.
Insert CD with label side up.
Wipe CD with clean cloth or use
another disc.
Clean or replace the defective disc. Use a
CD-lens cleaning disc to clean the lens.
Relocate the player away from shock
or vibration.
Disconnect the appliance from the power
supply.
Connect the power plug again to an
electrical outlet.
This is normal operation due to new ECO
regulation requirements this product
incorporates a power saving feature.
5
Publicidad
