Publicidad
Idiomas disponibles
Idiomas disponibles
IMPACT 840
VOLUME PUMPED SCREEN
The Volume Pumped screen shows the
total number of gallons or liters sprayed
by the sprayer.
To select the Volume Pumped screen,
press the #4 key.
JOB VOLUME SCREEN
The Job Volume screen allows the user
to reset a liter counter to track usage on
specific jobs.
To select the Job Volume screen, press
the #4 key.
UNIT SERIAL # SCREEN
The Unit Serial # screen shows the
sprayers serial number.
To select the Unit Serial # screen, press
the #4 key.
TIMERS SCREEN
The Timers screen shows the total time
the sprayer has been turned on as well
as the total time the sprayer has been
running (pumping).
To select the Timers screen, press the #4
key.
JOB TIMERS SCREEN
The Job Timers screen allows the user to
reset the "ON TIME" and "RUN TIME" to
track time on specific jobs.
To select the Job Timers screen, press
the #4 key. "JOB ON" screen will appear.
Press #3 to reset. Press #1 to continue
to "JOB RUN" screen. Press #3 to reset.
Press #1 to scroll through the remaining
menu screens.
SERVICE TIME SCREEN
The Service Time screen allows the user
to set a service time interval (in hours).
Below the set time, the screens shows the
current amount of hours on the sprayer since the last activation of the
service timer. To select the Service Timer screen, press the #4 key.
To set the service time, press the #2 (up)
and/or the #3 (down) keys to the desired
time (run hours will increase/decrease in
increments of 25 for each time you press
a key).
When the sprayer reaches the SERVICE@ time selected, the screen will
display "SERVICE DUE". To reset the timer, press the #3 key when the
pump is first turned on. This will reset the "SERVICE DUE" message and
also reset the "SERVICE TIME" to the previous setting.
VOLUME PUMPED
MENU-1
SELECT-4
GALLONS
X
MENU-1
JOB VOLUME
MENU-1
SELECT-4
JOB GAL
XXXX
MENU-1
RESET-3
UNIT SERIAL #
MENU-1
SELECT-4
SER # XXXXXXXXXX
MENU-1
TIMERS
MENU-1
SELECT-4
ON TIME
XXXX
RUN TIME
XXXX
JOB TIMERS
MENU-1
SELECT-4
JOB ON
X
MENU-1
RESET-3
JOB RUN
X
MENU-1
RESET-3
SERVICE TIME
MENU-1
SELECT-4
SERVICE @
XX
RUN HOURS
XX
SECURITY CODE SCREEN
The Security Code screen allows the user
to set a four digit security code to prevent
unauthorized use of the sprayer. If a
security code has been set, the control system display will ask for the
code at startup. If the correct code is entered, the display will show the
Main Screen and the sprayer will operate. If the wrong code is entered,
the display will continue to ask for the correct code and the sprayer will
not work. To set or change the security code, press the #2 key.
If the sprayer is new, no security code is set and the
i
Main Screen will appear at startup. When setting a
security code for the first time, the "Enter Old Code
Number" screen will appear, and you will need to
enter "1111".
Enter the old security code number to access the screen that allows the
code change. If the wrong code is entered, the display will continue
to ask for the correct code and the security code cannot be changed.
Enter the new security code. Once the
new code is entered, the display will
automatically ask that the new code be
re-entered for verification. If the same
new code is re-entered, the display will
confirm that the new code has been
accepted and return to the Main Screen.
If the new code is re-entered incorrectly, the display will return to the
"Enter New Code Number" screen and the process will repeat.
If you forget or misplace your security code, you can contact Titan
customer service for assistance.
To inactivate the security function, enter "1111" at
i
the "Enter New Code Number" screen (this is the
default code that leaves the sprayer unlocked).
As a result, the Main Screen will appear at sprayer
startup.
PRIME SCREEN
The Prime screen appears when the
pressure control knob is set at the "MIN"
setting.
RAPID CLEAN SCREEN
The Rapid Clean screen appears when
the pressure control knob is set at the
RAPID CLEAN position and the PRIME/
SPRAY valve is in the PRIME position.
If there is no action at any menu screen for 30
i
seconds, the display will go back to the Main
Screen.
OPERATION
SECURITY CODE
MENU-1
CHANGE-2
ENTER NEW CODE
NUMBER
XXXX
RE-ENTER NEW
NUMBER
XXXX
NEW CODE NUMBER
ACCEPTED
PRIME
RAPID CLEAN
11
Publicidad
