Publicidad
Idiomas disponibles
Idiomas disponibles
DANGER RISK OF
EXPLOSION OR FIRE!
DO NOT PLACE UNIT IN AN
AREA WHERE FLAMMABLE
GAS VAPORS MAY BE PRES-
ENT. A SPARK COULD CAUSE
AN EXPLOSION OR FIRE!
RISK OF UNIT BURSTING!
DO NOT STORE/OPERATE
UNIT IN A FREEZING ENVI-
RONMENT.
WARNING RISK OF
ASPHYXIATION!
-DO NOT OPERATE IN AN
ENCLOSED AREA. USE THIS
PRODUCT ONLY IN WELL VEN-
TILATED AREAS!
-THE EXHAUST FROM THE
ENGINE CONTAINS CARBON
MONOXIDE, A POISONOUS,
ODORLESS AND INVISIBLE
GAS. BREATHING THIS GAS
CAN CAUSE SERIOUS INJURY,
ILLNESS & POSSIBLE DEATH.
DANGER RISK OF FIRE!
-DO NOT SMOKE WHILE FUEL-
ING!
-DO NOT FILL THE FUEL TANK
WHILE UNIT IS RUNNING OR
HOT. ALLOW UNIT & ENGINE
TO COOL FOR 2 MINUTES BE-
FORE REFUELING!
-DO NOT FILL FUEL TANK TO
POINT OF OVERFLOWING. AL-
LOW 1/4" OF TANK SPACE FOR
FUEL EXPANSION.
WARNING RISK OF
EXPLOSION OR FIRE!
ALWAYS STORE FUEL AWAY
FROM THE WASHER WHILE
THE UNIT IS RUNNING OR
HOT.
10
INSTALLATION & PREPARATION
ATTIRE:
Proper attire is essential to your safety. It is advised to utilize whatever
means necessary to protect eyes, ears, and skin. Additional safety attire
(such as respiratory mask) may be required when using detergent cleaning
agents with this washer.
SET-UP:
1. This unit should only be placed on a level surface to ensure proper lubrication
for the engine and water pump while operating.
2. DO NOT place unit in an area:
a. with insufficient ventilation.
b. where there is evidence of oil or fuel leaks.
c. where flammable gas vapors may be present.
3. Be certain to block the wheels to prevent the unit from moving while
operating. If applicable, attach the handle to the unit and line up the holes
in the base and handle. Locate the two knobs and bolts supplied with your
unit. Push the bolts through the handle holes and tightly screw onto the
threaded knobs.
4. Remove the hose assembly and gun assembly from the carton. If applicable,
screw the male end of the hose into the female end of the gun. Tighten
securely.
5. Do not allow the unit to be exposed to rain, snow or freezing temperatures.
If any part of the unit becomes frozen, excessive pressure may build up in
the unit which could cause it to burst, resulting in possible serious injury
to the operator or bystanders.
ENGINE FUEL TANK:
1. Review "Fire & Ventilation Precautions" pg. 4, before fueling.
2. Locate the Safety Decals on your unit and heed their warnings.
3. On initial start-up, add oil to the engine, (18 oz.). See Engine manual for
proper oil level. The oil level must be checked each time thereafter before
starting the engine.
4. A minimum of 77 octane fuel is recommended for use with this unit. DO
NOT MIX OIL WITH GASOLINE.
5. Purchase fuel in quantities that may be used within 30 days. Use of clean,
fresh lead free gasoline is recommended. Leaded gasoline may be used
if lead-free is unavailable. DO NOT use gasoline containing methanol or
alcohol.
6. Fill the fuel tank according to accompanying engine manual instructions.
7. Review the engine manual accompanying this pressure washer for correct
engine start-up and maintenance procedures.
Operator's Manual
Publicidad
