Descargar Imprimir esta página

ECOPOSTURAL C6981 Instrucciones página 15

Camilla eléctrica

Publicidad

Idiomas disponibles

Idiomas disponibles

English
grasping the upholstery or the lifting mechanism as these could be damaged.
Follow instructions at all times to avoid injury and always observe the safety procedures to move or lift the
stretcher.
The table must lean on a solid and level ground.
Notice: in certain floor surfaces the table legs might leave marks after a prolonged contact. Check the
technical specifications of the floor manufacturer to avoid any trouble.
The table is equipped with 4 non-sliding screw-in levellers placed at the bottom of the table. Simply wind or
unwind any of them to level the table.
See image 1.
Image 1
In order to move the table around, you will need to actuate the castors by inserting the Allen key No. 6,
supplied with the table, into the holes at both sides of the bottom black casing (see image 2). Insert the
Allen key through the shorter side in a way that the longest side is pointing upwards. This way, the lever
effect will help you succeed.
Next, make sure the key fits in the screw slot correctly and turn the key towards the feet part of the table to
release the castors (see image 3).
To lock the castors, insert the Allen key and turn in the opposite direction, which is to say, towards the
head part of the table.
Image 2
15

Publicidad

loading