Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1: ASSEMBLING THE INNER SILVER FRAME
Take the parts F1 and F2 and place them on the left and right sides. Bring
the two vertical profiles together and secure S1 and S2 with the M5*8 screws.
Repeat this step for the lower profile.
Take the two joined parts A and two parts F3 and arrange them so that they
form a rectangle. Insert S3 into the slots at the four corners, adjust them until
the joint gap is minimal and screw the corners with the M5*8 screws. Take F4
and place the support strut in the centre of the frame, align it with the pre-in-
stalled holes and tighten all screws to complete the front connection of the
frame.
Carefully turn the assembled frame,
take the corner connectors S4 and in-
sert them into the corners of the frame,
turn the screws by 90 degrees to fasten
the corner connectors. This completes
the installation of the inner frame.
Part A:
F1
Align
F3
ront view
S4
S2
F2
S1
Part A
S3
F4
Rear view
6
Publicidad
