Publicidad
Idiomas disponibles
Idiomas disponibles
Code setup
1. The system should remain unlocked during programming.
2. The door-handing identification process (see "Function setup" instructions) must be
performed before programming the lockset. This process must also be performed after
restoring the default system settings.
3. During initial installation, it is recommended to change the default programming code
(0000), delete the default user code (1234), and add the new personal user code prior to
setting up other functions.
4. The LED will flash orange slowly during programming. The LED will flash green twice
with 2 long beeps to indicate successful programming. The LED will flash red 3 times
with 3 beeps if there is an operation error (in this case, wait 6 seconds or press the
Program/Lock button, then reprogram the setting).
5. During the function setup, if it takes longer than 6 seconds to finish any step, the system
will automatically leave the program.
6. This product can be operated with the keypad or key.
7. Please refer to the "Function setup" instructions.
Notification
1. Alkaline batteries are recommended to maintain stable and prolonged power.
2. Do not mix the alkaline batteries with regular zinc-carbon batteries and avoid mixing
batteries of different brands.
3. Do not use any chemicals or add any lubricants when cleaning the lock, to avoid
damaging the panel and coating.
4. In case of malfunction, please contact Customer service at 01-800-326-2501 /
0181 8262 5900 to be directed to the nearest service center for maintenance and/or
repair.
11
Publicidad
