Publicidad
Idiomas disponibles
Idiomas disponibles
3. Install the keypad assembly
a. Ensure the latch bolt is retracted.
b. Follow the illustration below to install the cylinder. Place the cylinder into the keypad with
the tailpiece in a horizontal position, and insert it through the hub of the latch.
c. Pass the cable under the latch to the interior side of the door.
a
4. Install the interior mounting plate
a. Pass the cable through the cable hole in the
interior plate. Then fasten the interior plate
with screws.
b. Examine whether the exterior lock unit and
the interior plate are tilted. If so, please
loosen the screws for adjustment, and re-
fasten the screws.
b
Cylinder
c
Mounting Plate
Screws
Cable
Cable
4
Publicidad
