Publicidad
Idiomas disponibles
Idiomas disponibles
Install new lock on the new door
To install this product on a new door, please go through the following steps to drill the hole.
Mark the Door with Template
Select the height and backset as desired on the door face; use the
template as an indication to mark the center of the circle on the
door face and the center of the door edge.
Drill Holes
Using the marks as a guide to drill a hole Ø2-1/8" (54mm) through
the door face for the lockset, then a hole of Ø1" (25.4mm) for latch.
2
Publicidad
