cecotec ENERGYSILENCE 9890 SKYLINE BLADELESS Manual De Instrucciones página 38

ENGLISH
3. OPERATION
After unpacking, check the appliance for damage and any defects.
Switch on
Plug the tower fan into the power socket. The appliance will enter standby mode and the
power indicator light will light up.
On/off
If you press , the fan will operate at low speed, and the corresponding indicator light will
light up. If you press it again, the fan will enter standby mode.
Speed
Press the to select high, medium, or low speed. The corresponding indicator light will turn
on/off.
Oscillation
Press to make the fan oscillate, press it again to stop the function. The corresponding
indicator light will turn on/off.
Note: do not turn the fan body directly by hand or forcibly change the direction of the air supply,
as this will damage the oscillation function.
Timer
Press to schedule time from 0 to 15 hours.
Remote control
Fig. 3
The remote control has the following functions:
1. Power button
2. Speed button
3. Mode button
4. Timer button
5. Oscillation button
NOTE:
- The buttons on the remote control that match the functions on the control panel operate
in the same way.
- The mode button is the only button on the remote control that is not on the control panel.
Mode button
- Press the mode button
indicator light will turn on/off on the control panel.
ENERGYSILENCE 9890 SKYLINE BLADELESS
38
ENERGYSILENCE 9890 SKYLINE BLADELESS DARK
to set the power (Normal, Natural or Night), the corresponding