Descargar Imprimir esta página

Stocker E-150 LM 21 V Manual De Instrucciones página 97

Publicidad

Idiomas disponibles

Idiomas disponibles

7
Instructions for use
1.
Release the trigger by pressing the safety button to the right or left.
2.
Hold down the safety button, then press the trigger to start the chainsaw. The safety button
can be released when the chainsaw is running.
3.
Start the chainsaw (chain in rotation) before placing the chain on the branch to be pruned.
4.
Maintain maximum chain rotation during cutting.
5.
Do not exert excessive pressure on the chainsaw against the branch to avoid excessive
motor stress, chain overheating and to avoid drastically reducing battery life. (the chainsaw
must „cut by itself". You have to press the minimum necessary to keep it in place and make
it sink into the wood thanks to the traction of the chain. Pressing it firmly against the wood
could cause problems)
6.
Cut with the central part of the bar and never with the tip to avoid kickback or loss of con-
trol of the chainsaw.
7.
Once the branch has been cut, release the trigger to stop the chain. This also avoids was-
ting the battery or any accidental injuries.
8.
Check the lubrication and tension of the chain after every 5-10 cuts. Lubricate the chain
and, if necessary, adjust the chain tension again.
WARNING
In the event of chainsaw kickback, it does so towards the user, causing serious or fatal injury.
a. Be sure to cut at maximum speed when cutting.
b. Do not cut with the head of the bar.
c. When starting to cut, keep the chainsaw at full speed and the bar vertical.
192
Art. 616 / Art. 617
Chainsaw Magma E-100 LM / E-150 LM 21 V
Usage
Art. 616 / Art. 617
Chainsaw Magma E-100 LM / E-150 LM 21 V
Usage
Cutting branches of trees
a. Place the chainsaw bar on the branches to be trimmed.
b. The chain operates at full capacity.
c. Cut the branches with the top of the bar.
d. Cut the tensioning branches: first, cut a small opening on the free side and cut continuously
under the narrow side.
Automatic switching off of the LED display
After 1 minute of inactivity, the chainsaw LED display switches off automatically, thus helping to
save energy.
For further information about the product, please contact info@stockergarden.com
7
193

Publicidad

loading

Este manual también es adecuado para:

E-100616617