LGB ABe 4/4 Manual Del Usuario página 10

SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Oil (7149).
Changing Light Bulbs (E130023)
Lamps (below): Carefully lift the glass from the lantern. Using a pair of tweezers, pull
the light bulb plugged into the socket out of the latter. Insert a new light bulb. Put the
model back together again.
Lamps (above): Remove the lamp housing from the model. Pull the light bulb plugged
into the socket out of the latter. Insert a new light bulb. Put the model back together
again.
Interior Lighting: This model must be disassembled extensively to replace the light
bulbs. We therefore recommend having these light bulbs replaced by an authorized
repair station.
Changing Traction Tires (E126174)
Remove the old traction tire with a small flat blade screwdriver: Lift the old traction
tire out of the groove in the driving wheel. Carefully push the new traction tire over
the wheel and insert it into the groove of the wheel. Check to make sure that the
traction tire is properly seated.
Controllable Functions
1
Lighting
Sound effect: Long whistle blast
Sound effect: Squealing brakes off
Pantograph sound (up/down)
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Operating sounds
Interior lights
Sound on/off
ABV, off
Sound effect: Short whistle blast
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Blower
Sound effect: Compressor
Sound effect: Sanding
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Conductor's whistle and doors closing
Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Coupling together (buffer to buffer)
1
active in analog operation
2
with random sounds
10
1, 2
LV + LR
1 Sound 1
2 BQ
3 Sound 19
4 Sound 5+6
5 Sound 4
6 FS
7 AUX 3
8
9
10 Sound 2
Sound
11
22+23
12 Sound 24
13 Sound 9
14 Sound 11
15 Sound 15
16 Sound 20
17 Sound 21
18 Sound 13
19 Sound 17
20 Sound 16
21 Sound 18