Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn it off and unplug unit from the outlet.
CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE
The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when the red LED
above the clean reset button is illuminated. Failure to do so may cause reduced or no mist output.
1. Remove the water
tank from the
humidifier base
and set aside.
2. Pour out any
remaining water
inside the
water reservoir.
TO CLEAN THE TANK
Remove the water tank from the humidifier base by lifting it from the
main unit. Unscrew the tank cap and rinse inside the tank with
clean water.
Every day: Empty and rinse the tank and tank cap before refilling.
Every week: To remove any scale or buildup, use a 50/50 mixture of white
vinegar and lukewarm water to clean the inside of the tank.
Transducer/ultrasonic membrane
3. Clean the transducer/ultrasonic membrane
with a 50/50 mix of white vinegar and water
on a cotton swab. Wipe off with a damp cotton
swab. Press and hold the clean reset button for
3 seconds until the clean light turns off.
NEVER touch the transducer/ultrasonic
membrane with your fingers; the natural
oils in the skin can damage the surface.
NEVER submerge the base in water or any other
liquid.
11
Publicidad
