Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation and Installation
Refrigerator unit preparation
1. Packaging:
Remove all packaging, including the foam backing at the bottom of refrigerator and the tape fixing accessories in the box.
2. Standing time:
Place the refrigerator in a proper up-right position for more than one hour before connecting power to ensure refrigerant
settling for its normal operation.
3. Cleaning:
Make sure the accessory parts inside the refrigerator are present and the inside is wiped with a soft cloth.
Site preparation and installation
1. Ventilation requirements:
The position you select for the refrigerator installation should be well-ventilated with minimal hot air. Do not place your
refrigerator close to a heat source and avoid exposure to direct sunlight to guarantee optimum refrigerator performance with
minimum energy use.
Unobstructed ventilation shall be maintained around the refrigerator or an embedded structure.
2. Heat dissipation space:
During operation, the unit gives off heat to surroundings. Ensure that there is adequate space between the refrigerator and
neighboring walls or large objects. A minimum spacing of 25.4mm (1.0") is highly recommended on the top, on both sides and at
the backside of the refrigerator.
Dimensions suggested below:
W
D
600mm (23.62")
665mm (26.18")
3. Level ground:
To ensure proper function, the refrigerator must be placed on a flat, firm and stable surface resting level on four supports.
CCD-0007851 Rev: 08-15-23
H
A
1520mm (59.84")
888mm (35.0")
B
C(°)
1210mm (47.64")
125+2
- 5 -
E
F
Minimum
Minimum
25.4mm (1.0")
25.4mm (1.0")
Publicidad
