Publicidad
Slot
Fente
Ranura
To Reinstall
To Remove
Pour enlever
Pour réinstaller
Para quitar
Para reinstalarse
Cleaning Agitator
Replacing Headlight Bulb
Light Lens
Lentille de la
lampe
Lentes de luz
- 32 -
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.
➢ ➢ Disconnect power cord from
electrical outlet.
➢ ➢ Pry out light lens at slot by inserting
screwdriver into slot, pushing down
on the lens and rotating the
screwdriver handle toward unit.
➢ ➢ Remove the light bulb by pulling
straight out.
CAUTION
Do not use a bulb rated over 9W (15V).
During extended use, heat from the bulb
could overheat surrounding plastic parts.
➢ ➢ To replace the light bulb carefully
insert securely into slot. Replace lens
cover by inserting tabs.
➢ ➢ Secure light lens by snapping into
place.
Publicidad
