AEG BSE77228BM Manual De Instrucciones página 122

TROUBLESHOOTING
Step 2 Remove the metal ring and clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Attach the metal ring to the glass cover and install it.
Side lamp
Step 1 Remove the left shelf support to get
access to the lamp.
Step 2 Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cov‐
er.
Step 3 Clean the glass cover.
Step 4 Replace the lamp with a suitable
300 °C heat-resistant lamp.
Step 5 Install the glass cover.
Step 6 Install the left shelf support.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
The oven does not turn on or does not heat up
Possible cause
The oven is not connected to an electrical sup‐
ply or it is connected incorrectly.
The clock is not set.
The door is not closed correctly.
122/312
Remedy
Check if the oven is correctly connected to the
electrical supply.
Set the clock, for details refer to "Clock Func‐
tions" chapter, How to set: Clock functions.
Fully close the door.