Parkside PRT 550 B6 Manual De Instrucciones página 30

5) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
the power tool's operation. If
damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools .
6) Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less likely to
bind and are easier to control .
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations different
from those intended could result in a
hazardous situation .
8) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations .
Service
1) Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool is maintained .
Additional safety instructions
Training
The product is not suitable for use by
children . Children should be supervised
to ensure that they do not play with the
product . Cleaning and user maintenance
shall not be made by children .
This product is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge .
30 GB/IE
Never let children or persons who are not
familiar with the instructions mentioned use
the product .
Local regulations or by-laws may determine
the minimum age for using the product .
The operator or user is responsible for
accidents or damage to other people or
their property .
Read the user manual carefully . Be familiar
with the controls and the correct use of the
machine .
The product must not be used at altitudes
higher than 2000 m .
Preparation
Before each use, carry out an inspection
on damaged, missing or wrongly mounted
protective devices or parts of the cutting
device .
Before commissioning and after any
impacts, check the product for signs of wear
and damages, and have any necessary
repairs performed .
Use only approved extension cords
(H05VVH2-F) that are not more than 75 m
long and designed for outdoor use . Always
roll the extension cord completely off the
cable drum before use . Check the extension
cord for damage and ageing .
Do not connect a damaged cable to the
mains supply . Do not touch a damaged
cable before it has been disconnected from
the mains supply, as you could come into
contact with live parts .
Prior to use, check the mains cord and
extension cord for signs of damage or
ageing . If the cord is damaged during use,
disconnect it from the mains immediately .
DO NOT TOUCH THE CORD BEFORE IT
HAS BEEN DISCONNECTED FROM THE
MAINS SUPPLY . Do not use the product if
the cord is damaged or worn .
To unplug the mains cord from the socket,
always pull on the mains plug, and never
on the mains cord .