Publicidad
Idiomas disponibles
Idiomas disponibles
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard .
Operation
m
WARNING!
u
Do not touch any moving dangerous
parts before the product has been
unplugged from the mains supply and the
moving dangerous parts have come to a
complete stop .
Keep the connecting cable and extension
cable away from the cutting device to avoid
damages to the cords which can lead to
contact with live parts .
Wear safety goggles, stable shoes and
long trousers over the entire period of use
of the product .
The use of the product under bad weather
conditions, especially in case of lightning
risk, must be avoided .
There is a risk of injury from cuts on hands
and feet .
Stop using the product when persons,
above all children, and house pets are in
the vicinity .
Use the product only in daylight or with
good artificial lighting .
Always keep your hands and feet away
from the cutting equipment, above all when
you switch the motor on .
Never replace the non-metallic cutting
device with a metallic cutting device .
Never use the product with damaged or
missing protective equipment or covers or if
the cord is damaged or worn .
Avoid an abnormal body posture . Ensure
secure footing at all times to maintain
balance when working on slopes .
Go slowly . Do not run with the product in
your hand .
In the case of an accident or malfunction
during operation, switch off the product
immediately . Injuries must be properly
treated or medical assistance sought . Read
the "Troubleshooting" section to correct
any malfunctions or contact our customer
service .
Keep the extension cord away from
dangerous moving parts to prevent
damages to cords that can lead to contact
with live parts .
If the mains cord gets damaged or
becomes tangled during use, immediately
switch off the product and unplug the mains
cord to disconnect the product from the
mains supply .
Use a residual current device (RCD) with a
tripping current of not more than 30 mA .
Do not use any accessories that are not
recommended by Parkside . This can result in
electric shock or fire .
Always disconnect the product from the
mains supply (i .e . disconnect the plug from
the mains)
whenever the product is left unattended;
–
before clearing a blockage;
–
before checking, cleaning or using the
–
product;
after striking a foreign object;
–
whenever the product starts vibrating
–
abnormally .
If the product starts to vibrate abnormally,
an immediate check must be carried out .
Search for signs of damage .
–
Perform any necessary repairs to
–
damaged parts .
Examine for loose parts and tighten
–
these .
Always ensure that the ventilation openings
are kept free of foreign objects .
Maintenance and storage
Disconnect the product from the mains
supply (i .e . disconnect the plug from the
mains) before carrying out maintenance or
cleaning work .
GB/IE
31
Publicidad
