Publicidad
Idiomas disponibles
Idiomas disponibles
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read these instructions and the accompanying
safety information carefully before starting up the
device and starting work with the device.
Keep these instructions in a place that is accessible to all users.
Thank you for the confidence you have shown in buying this device.
The device has been manufactured in accordance with the most rigorous
quality standards which ensure that it operates perfectly.
These instructions contain important information which will help you to start
up, operate and service the device safely and correctly as well as to eliminate
simple faults and malfunctions yourselves.
Always pass on the device to third parties together with these operating in-
structions. The device has been manufactured in accordance with state-of-
the-art technology and acknowledged regulations concerning safety. There
is nevertheless the risk of personal injury and damage to property if you fail to
observe the safety information and the warnings given in these instructions.
Please adhere to the operating instructions of the connected devices.
Safety information
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorized persons. Never
allow other persons to touch the device or cable.
WARNING
Electrical shock
Protect yourself against electric shocks. Connecting the control unit
incorrectly poses a risk of injury due to electric shock and can damage
the device.
Carefully read the attached safety information, the safety information accompa-
nying these operating instructions before putting the control unit into operation
and observe the safety precautions specified therein.
• Only use the supplied, detachable power supply unit (T0058771809).
• If the device is faulty, active electrical conductors may be bare or the
PE conductor may not be functional.
• Repairs must always be referred to a Weller-trained specialist.
• If the electrical tool's power supply cord is damaged, it must be replaced
with a new power supply cord available through the customer service
organization. If the electrical tool's power supply cord is damaged, it must be
replaced with a specially prefabricated power supply cord available through
the customer service organization.
• Protect yourself against electric shocks.
• Avoid touching earthed objects such as pipes, heaters, cookers and
refrigerators.
• Do not use the device in a damp or wet environment.
• Never work on voltage-carrying parts.
CAUTION!
To provide continued protection against risk of electric shock, connect to
properly grounded outlets only.
The power cable must only be plugged into the power socket or adapter
approved for this purpose. Check to see if the mains voltage matches
the ratings on the nameplate. Make sure the machine is switched off before
plugging in.
Do not use the cable for purposes other than those for which it is inten-
ded. Do not use the cable to pull the plug out of the socket. Protect the cable
against heat, oil and sharp edges.
Be alert. Pay attention to what you are doing. Be smart when using the unit.
Do not use the device if you are having difficulty concentrating.
Avoid abnormal posture. Arrange your work station in an ergonomically
correct way. Avoid bad posture when using the unit, as this can lead to postural
problems. The device must be operated only in perfect technical working
order.
Safety devices must not be deactivated. Faults and defects must be
repaired immediately.
Before using the unit / tool, safety devices must be carefully checked to
make sure that they are functioning properly and in the manner intended.
Check that moving parts are functioning properly and are not sticking,
and whether parts are damaged. All parts must be correctly fitted and must
satisfy all the requirements necessary to guarantee troublefree operation of
the unit.
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Use the correct tool. Use only accessories or auxiliary devices which are
included in the list of accessories or approved for use by the manufacturer. Use
WELLER accessories or auxiliary devices on original WELLER equipment only.
Secure the tool. Use clamping fixtures to hold the workpiece.
Danger of injury
WARNING
The device or parts of the device may fall off during transportation.
• Hold the device by the intended handles only.n.
• Never use the device as a means of transportation.
Danger of asphyxiation Danger of poisoning
WARNING
Improper installation can result in above-normal workplace concentra-
tions
• Measure the workplace concentration upon completion of installation
work
Inappropriate maintenance cycles for gas media may result in above-
normal workplace concentrations
• Specify maintenance cycle
Above-normal contamination levels in the ambient air during cleaning
work on the pipe system/extraction area
• If suction capacity is impaired by build-up within the pipe system, replace the
contaminated parts
A saturated activated carbon filter will not be able to capture harmful
substances. The harmful substances will be released back into the
environment unfiltered.
• Observe the recommended filter replacement intervals.
High concentrations of harmful gases can lead to overheating of the acti-
vated carbon and possibly trigger spontaneous combustion of the filter.
• Run the unit on clean air for several minutes before switching off.
WARNING Misuse may lead to injury.
Use this product solely in accordance with these instructions.
• Do not attempt to modify the product in any way.
• Ensure that the fan is switched off from the supply mains before removing
the guard.
Specified Conditions Of Use
This filtration system is suitable for the extraction and filtration of particles and
gases, depending on the filter medium used.
WARNING Danger of asphyxiation, Danger of poisoning
Improper use may result in respiratory problems, asphyxiation, poiso-
ning or cancer
• Particles and gases which are unsuitable for the filter medium in use may
not be extracted.
• Liquids and flammable gases may not be extracted
• Never use the device without a filter or with a full filter.
• Never use the device without the fan covers
This device may only be used at room temperature and indoors.
The unit is designed for use as a surface extraction unit and is not suitable for
extracting fumes directly from the soldering gun.
Intended use of the soldering station/ desoldering station also includes the
requirement that you
• adhere to these instructions,
• observe all other accompanying documents,,
• comply with national accident prevention guidelines applicable at the place
of use.
EN
ENGLISH
17
Publicidad
