Publicidad
Idiomas disponibles
Idiomas disponibles
10
FOUR LFO
FOUR LFO Controls
(2)
(1)
(5)
(6)
(7)
(9)
(13)
(10)
(16)
(17)
(20)
(21)
(22)
(3)
(4)
(8)
(11)
(12)
(15)
(14)
(19)
(18)
(EN) Controls
(1) FADER 1 – this fader has two
functions: in free-running mode
it sets the frequency for LFO 1;
otherwise it acts as a master
fader for the other three faders to
reference.
(2) FADER 2 – in free-running mode
this acts as frequency control for
LFO 2; otherwise it acts as an offset
against the master for LFO 2.
(3) FADER 3 – as fader 2 but for LFO 3.
(4) FADER 4 – as fader 2 but for LFO 4.
(5) FREE LED – when this LED
is lit the FOUR LFO is in
free-running mode.
(6) MODE – use this switch to
select the action for sockets 16.
In RESET mode a gate applied
to the socket(s) will cause the
waveform(s) of the LFO(s) to reset;
in SYNC mode the LFO(s) will sync
to a clock sent to the socket(s).
(7) TOGGLE – use this button to
switch between:
• Free-running, where the four
LFOs work independently.
• Quad, where LFOs 2 – 4 are
slaved to LFO 1 but are 90°,
180°and 270° out of phase
Quick Start Guide
respectively. Faders 2-4 and
sockets 10-12 control the
amplitude of LFOs 2-4.
• Phase, where faders 2-4 set
the phase of LFOs 2-4 against
LFO 1. Sockets 10-12 allow
further control of shift from
external CVs.
• Divide, where faders 2-4 set
divisions of LFO 1's frequency
for LFOs 2-4. Sockets 10-12
allow further CV control.
(8) ASSIGN – sets the waveform that
will be output from sockets 18.
Choose between sawtooth, ramp,
triangle and trapezoid. This is a
global setting which will affect all
four LFOs.
(9) FREQ – use this socket to control
the frequency of LFO 1 from an
external CV source, in the range
-5 V to +5 V.
(10) (11), (12) – FRQ/PH/DIV – use these
sockets to allow external CV control
of LFOs 2-4 according to whichever
mode the FOUR LFO is in. range in
all modes is -5 V to +5 V.
(13) QUAD LED – this LED is lit when
the FOUR LFO is in Quad mode.
(14) PHASE LED – this LED is lit when
the FOUR LFO is in Phase mode.
11
Publicidad
