Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Store the device out of reach
•
of children.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Do not insert the plug
into the outlet until the device is fully pre-
pared for use.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
On/Off switch (1)
• Switching on: Move the On/Off switch
(1) to the position "I" (ON).
• Switching off: Move the On/Off switch
(1) to the position "0" (OFF).
Filter cleaning button (6)
• Filter cleaning button, p. 29
Air control (21)
• Open the air control: Suction power at
the nozzle is lower.
Lock (16)
Adjust the length of the telescopic suction
tube (18).
1. Press and hold the lock (16) of the suc-
tion tube (18) forwards.
2. Adjust the inner part of the telescopic
suction tube (18) to the desired length.
3. Release the lock (16) of the suction
tube (18).
4. If the inner part of the telescopic suc-
tion tube (18) does not engage, push
it forwards or backwards to the next
notch.
26
Attaching and removing the
motor head
Disassembling the motor head
(Fig. A)
1. Unlock the snap locks (9) on the dirt
container (10).
2. Take the motor head (3) off.
Place the motor head (3) with the top
facing downward.
Assembling the motor head
(Fig. A)
1. Place the motor head (3) on the direct
container (10). The On/Off switch (1)
points to the suction connector (14).
2. Lock the snap locks (9) on the dirt con-
tainer (10).
Assembly
State on delivery
• Motor head (pre-mounted)
• Pleated filter (pre-mounted)
• 5 × Foot (with castor and accessories
holder) (not assembled).
Assembling the feet (Fig. B)
1. Remove the motor head (3).
2. Place the dirt container (10) on a solid
surface with the bottom facing up.
3. Place the feet (11) in the holders on
the bottom of the dirt container.
You will hear the feet click into place.
4. Mount the motor head (3).
Attaching and removing the
suction hose
Suction hose assembly (Fig. A)
1. Insert the thick end of the suction hose
(19) with the lock (20) into a connect-
or:
• Suction: Suction connector (14) (on
the dirt container)
• Blowing: Blower connector (15) (on
the motor head)
Publicidad
