Descargar Imprimir esta página

Parkside PWD 25 C4 Traduccion Del Manual De Instrucciones Originale página 31

Aspirador en húmedo y seco

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 70
Troubleshooting
The following table will assist you in fixing faults:
Problem
Device does not start
Weak or no suction power/
throughput
Float does not close suction
opening
Dust or dirt is blown out of
the device
Service
Guarantee
Dear Customer,
This product is provided with a 3 year
guarantee from the date of purchase.
Possible cause
On/Off switch (1) turned off Check the position of the
No mains power supply
On/Off switch (1) is broken
Worn out carbon brushes
Defective motor
Suction hose (19) or nozzles
blocked
Dirt container (10) open
Dirt container (10) full
Filter (23/25) full or clogged Empty, clean or replace the
Float in filter basket (30) in
incorrect position (e.g. due to
jerky movements)
Float in filter basket (30) de-
fective
Float in filter basket (30) not
moving
Float in filter basket (30) de-
fective
Filter (23/25) not assembled
or incorrectly assembled
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The guarantee period begins on the date
of purchase. Please retain the original re-
GB
Error correction
On/Off switch
Check the socket, mains con-
nection cable, plug and fuse
and have them repaired by a
qualified electrician if neces-
sary.
contact the service centre.
Removing obstructions and
blockages
Attaching and removing the
motor head, p. 26
Emptying the dirt container
filter
Turn off the device, the float
will sink, then switch it back
on
contact the service centre.
Release float
contact the service centre.
Attaching and removing
the filter and filter bag,
p. 27
MT
31

Publicidad

loading