Gardena city gardening Instrucciones De Empleo página 14

To start the watering [ Fig. O1 / O2 / O3 ]:
CAUTION!
Damage to the pump if it runs dry.
v Make sure that the container is always suffi­
ciently filled with water.
1. Fill the container with the previously calculated amount of
water (make sure that the container in a secure position).
2. Place the pump in the container filled with water
(make sure that the pump is level with the bottom of
the container).
5 . MAINTENANCE
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before
you maintain the product.
To clean the pump:
DANGER! Risk of injury!
Risk of injury and risk of damage to the
product.
v Do not clean the product with a water jet
(in particular high­pressure water jet).
v Do not clean with chemicals including petrol or
solvents. Some can destroy critical plastic parts.
v Clean the pump with a damp cloth.
6 . STORAGE
To put into storage:
The product must be stored away from children.
1. Disconnect the watering control.
2. Clean the pump and the watering control
(see 5. MAINTENANCE).
3. Store the pump and the watering control in a dry,
enclosed and frost-free place.
14
GAR_01407-20.960.17_2024-06-19.indb 14 GAR_01407-20.960.17_2024-06-19.indb 14
(11) to the OFF position.
3. Turn the rotary switch
(2)
4. Connect the pump to the watering control
5. Plug the watering control (1)
(11)
6. Turn the rotary switch to the desired watering
program.
The watering starts and the control lamp
green.
7. During the first watering, check all connections for
leaks.
If the watering program is to be changed, the rotary
(11) must first be turned to the OFF position.
switch
To clean the filter [ Fig. M1 ]:
In order to ensure continuous trouble-free operation, the
(14)
filter should be cleaned at regular intervals.
1. Push in the two locks (12) and pull off the foot
wards.
(14)
2. Clean the filter and the foot
3. Reassemble all parts in reverse order. Make sure that
(12)
the two locks are correctly engaged.
The pump must not be operated without the filter
To clean the watering control:
Make sure that the surface and the contacts of the water-
ing control always are clean and dry before you connect
the watering control.
Do not use running water.
v Clean the contacts and the plastic parts with a soft and
dry cloth.
Disposal:
(according to Directive 2012/19/EU / S.I. 2013 No. 3113)
The product must not be disposed of to normal
household waste. It must be disposed of in line
with local environmental regulations.
IMPORTANT!
v Dispose of the product through or via your municipal
recycling collection centre.
(1)
.
into an electrical outlet.
(Lc)
illuminates
(13) down-
(13)
under running water.
(14)
.
19.06.24 20:54 19.06.24 20:54