Publicidad
Idiomas disponibles
Idiomas disponibles
STORING THE PRESSURE WASHER
See Figure 17.
NOTE: Regular use of pump protector will give you better
performance of the unit and increase the life of the pump.
Store in a dry, covered area where the weather can't damage it.
It is important to store this product in a frost-free area. Always
empty water from all hoses and the pump before storing.
Make sure the on/off switch is in the off (O) position.
Remove the battery and store in a secure location out of
the reach of children.
Disconnect all hoses.
This product has a five-year limited warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
MAINTENANCE
or call (toll free) 1-800-525-2579.
14 — English
Neatly coil the hoses and store with hook-and-loop strap.
Tilt the unit as shown to allow any remaining water in the
pump to drain from the water inlet.
NOTICE:
If the location where your pressure washer is stored will
fall below 32°F, the use of a pump protector is required
before storing to prevent freeze damage. Freeze damage
will void your warranty.
Store the unit and accessories in an area that does not
reach freezing temperatures. Do not store near furnace or
other sources of heat that could dry out the pump seals.
Publicidad
