Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTION DESCRIPTION
FUNCTIONS
Once the POWER button is engaged, the 203 °F (95 °C), BOIL and HEATING
indicators will light up. This indicates that the appliance is now heating up
POWER
the water to boil first and will maintain the water at 203 °F (95 °C) once the
switch
temperature drops to set temperature. Press the POWER button again, the
appliance will go back to the STANDBY mode and the POWER button indicator
light will blink.
Press the UNLOCK button to unlock the water dispenser. The UNLOCK indicator
UNLOCK
will light up in red. If the DISPENSE button is not engaged within 10 seconds, the
button
water dispenser will be locked anew.
Press and hold the DISPENSE button after pressing the UNLOCK button to
dispense hot water. The DISPENSE indicator will light up when button is pressed
and go OFF when button is released. 10 seconds after releasing the DISPENSE
DISPENSE
button, the UNLOCK indicator light will go OFF, indicating that the water dispenser
button
is now locked.
The DISPENSE button will not function as long as the UNLOCK button has not been
pressed prior to dispensing.
HEATING
The HEATING indicator light will be illuminated until the selected temperature
indicator
is reached.
The preset temperatures include 113 °F, 131 °F, 185 °F and 203 °F (45 °C, 55 °C,
TEMPERATURE
85 °C and 95 °C), and the default temperature setting is 203 °F (95 °C) once the
setting button
POWER button is pressed. After selecting your temperature, the indicator will blink
until it reaches his temperature.
KEEP WARM
The KEEP WARM indicator will turn ON once preset temperature is reached.
indicator
The BOIL setting will be ON by default. During the heating process, press the
BOIL button once to cancel this setting, the appliance will then bring the water
up to the preset temperature then switch to KEEP WARM. Ex: If the current water
temperature is less than 113 °F (45 °C), the water will be heated to 113 °F (45 °C).
If the current water temperature is more than 113 °F (45 °C), the water will cool
down automatically to 113 °F (45 °C).
BOIL
button
Under the KEEP WARM condition, press the BOIL button once, the appliance
will enter HEATING mode and keep heating until the water boils, removing
contaminants and chlorine from water.
NOTE: Only deactivate the BOIL function if you are using water that can be consumed
safely without needing to boil it first. If tap water is used, it is recommended to boil it
first, otherwise you will drink water that is warm and not boiled.
Press the TEMPERATURE button to select the desired water temperature.
SETTING
The TEMPERATURE button is sequential going from lowest temperature 113 °F
indicator light
(45 °C) up to 203 °F (95 °C).
NOTE: The temperature selected will be the temperature that will be kept warm.
WARNING: When BOIL function is ON, water will not immediately drop to 113 °F (45 °C) after it boils even if
preset temperature is 113 °F (45 °C).
6
DESCRIPTION
BEFORE INITIAL USE
READ THE INSTRUCTIONS BEFORE FIRST USE
If you are using the water dispenser for the first time, it is recommended that you clean your water
dispenser beforehand by boiling max capacity of water twice and then discarding the water.
1.
Remove and discard any packaging, sticker, or promotional labels/materials before first use.
2.
Open the lid by lifting the lever on the lid.
3.
Clean the water tank with warm water using a non-abrasive sponge and dry thoroughly.
WARNING: Before each use, verify that the silicone gasket located on the inside of the lid is
properly placed in the groove of the lid. To ensure proper placement, apply equal pressure on
the entire surface of the silicone gasket until it is properly placed in the groove.
WARNING: DO NOT immerse body, electrical cord or plug in water or any other liquid.
4.
Wipe the exterior lid and body with a damp cloth and dry thoroughly.
5.
Close the appliance.
NOTE: During first use of the appliance, smoke and/or a slight odour may occur from the
appliance. This is normal and will quickly disappear. It will not reoccur after appliance has
been used a few more times.
BOIL-DRY PROTECTION
Should you accidentally allow the appliance to operate without water, the boil-dry protection will
automatically switch it off. If this should occur, allow the appliance to cool before filling it with cold
water and re-boiling.
HOW TO USE
READ THE INSTRUCTIONS BEFORE USE
NOTE: DO NOT operate the appliance directly under kitchen cabinets. Provide adequate space above
and around the appliance for air circulation.
NOTE: Before each use, ensure the sealing ring is properly installed. Ensure the lid is tightly closed
before operating.
WARNING: DO NOT touch, cover, or obstruct the steam vent as it is extremely hot and may cause
scalding. Hot Steam will escape from the vent when water is boiling.
1.
Place the appliance on a flat, stable, heat resistant surface.
2.
Press down the lid lever and then pull the top lid upwards to open.
STEP 2
STEP 1
STEP 3
7
Publicidad
