Samsung RB45 Serie Manual De Usuario página 12

Step-by-step installation
STEP 1 Spacing (applicable models only)
NOTE
The number of provided spacers varies on the
model. Attach all the provided spacers.
1. Open the door and locate the provided spacer
(Gray block).
2. Unpack the spacer and attach it to the rear
of the refrigerator as shown. They help
ventilate air to the rear wall and save power
consumption.
12 Installation
Simple_BMF_RB6000D_DA68-04780Q-00_EN.indd 12
STEP 2 Adjust the levelling legs
CAUTION
• The refrigerator must be levelled on a flat, solid
floor. Failing to do so can cause damage to the
refrigerator or physical injury.
• Levelling must be performed with an empty
refrigerator. Make sure no food items remain
inside the refrigerator.
• For safety reasons, adjust the front side a little
higher than the rear side.
The refrigerator can be levelled using the front legs
that have a special screw (leveller) for levelling
purposes. Use a flat-head screwdriver for levelling.
To adjust the height of the left side:
Insert a flat-head screwdriver into the leveller of
the front left leg. Turn the leveller clockwise to
raise, or turn it anticlockwise to lower.
To adjust the height of the right side:
Insert a flat-head screwdriver into the leveller of
the front right leg. Turn the leveller clockwise to
raise, or turn it anticlockwise to lower.
2023-12-12 11:01:21